RADVision Scopia XT5000 Series Guide d'installation télécharger pdf (Page 110)

Figure 64: Defining the routing of the audio outputs

2. Set the fields as required.

Table 25: Configuring audio output settings

Field Name Description

Digital Audio to output If enabled, it routes the digital audio input port to

one or more of the system’s audio output

channels: HD1, digital audio and digital analog or

all of the above.

Echo Cancelled inputs to output This setting is disabled by default, to avoid echo

effects and feedback loops when a monitor

speaker is used.

If enabled, sends the echo cancelled input from

the microphones to one of the system’s audio

output channels: HD1, digital audio or analog

output.

Rx remote to output If enabled, sends the remote audio of other

conference participants to one or more of the

system’s audio output channels: HD1, digital

audio or analog output.

Analog to output If enabled, it routes the analog input port to one or

more of the system’s audio output channels: HD1,

digital audio or analog output.

3. From the web interface only, select Save.

Installation Guide for Scopia XT5000 Endpoint with Embedded

Server for IP Office Version 3.2

Initial Configuration | 110

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 158 159

Pas de commentaire

RADVision Scopia XT5000 Series Guide d'installation Page 110