RADVision Scopia XT5000 Series Guide de l'utilisateur télécharger pdf (Page 31)

Preparing for a Video Call or Videoconference | 26

RADVISION | User Guide for SCOPIA XT5000 Series Version 3.0

Connecting the Computer

You need a computer to share a presentation during a call. This procedure describes how to

connect computers that are equipped with a DVI out or VGA out connector.

The XT Codec Unit supports these DVI input formats: 1920 x 1080, 1440 x 900 (WSXGA), 1280 x

1024 (SXGA), 1280 x 720, 1280 x 768 (WXGA), 1024 x 768 (XGA), 800 x 600 (SVGA), 640 x 480 (VGA).

Procedure

Step 1

Connect your computer to the XT Codec Unit:

Caution Make sure all units are switched off whenever connecting or disconnecting devices.

• For computers and laptops with a DVI out connector, connect the DVI cable to the DVI-I socket

of the XT Codec Unit and connect the other end of the cable to the computer.

Figure 5-1 Connecting a computer to SCOPIA XT5000 Series

• For computers with a VGA output connector, use a DVI to VGA adapter.

a. Connect the DVI-VGA adapter to the DVI-IN socket of the XT Codec Unit.

b. Connect a VGA cable to the adapter. This cable is not supplied with the system.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 54 55

Pas de commentaire

RADVision Scopia XT5000 Series Guide de l'utilisateur Page 31