RADVision Scopia XT5000 Series Guide d'installation télécharger pdf (Page 83)

•

From the endpoint interface, select Configure > Advanced > I/O Connections > Cameras

> DVI. Press to start data sharing.

•

From the web interface, select Administrator Settings > I/O Connections > Cameras >

DVI. Press to start data sharing.

Configuring the Echo Canceller

If your SCOPIA XT Series works with an external microphone system that does not contain echo

cancellation, perform this procedure to cancel echo.

Before you begin

Enable echo cancellation as described in “Configuring the Microphone Pod” on page 74.

Procedure

Step 1

Access the echo canceller settings as follows:

•

From the endpoint interface, select Configure > Advanced > I/O connections > Echo

Canceller.

•

From the web interface, select Administrator settings > I/O connections > Echo

Canceller.

Figure 5-30 Cancelling echo from the web interface

Step 2

Set the fields as required.

RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Initial Configuration | 78

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 112 113

Pas de commentaire

RADVision Scopia XT5000 Series Guide d'installation Page 83